Troubleshooting of Car manual transmission

1, For the novice, halfway flameout is not a new topic, the main exclusion method after running quickly improve their driving skills.
2,Using products such as high level of qualified fuel.
3,A thorough cleaning of the oil will be, including fuel injectors, throttle, fuel tank and so on. There may be you add oil quality, but off mastic too much, the oil blocked, attack caused by poor oil.


4,For the car idle state flame failure was mainly due to too much dust in the air, the engine idling motor running and the throttle valve seat at many dirt deposition, when excessive accumulation of dirt, the engine will be idling too low, idling stability is poor, idle flameout occurs when driving. To solve this problem is very simple: just wash idle speed motor can be.
5,Due to the increase in oil prices, coupled with the return of many hobbies--increase in bike, walk to work, so new chronic parked cars do not use.In fact, avoid long Park No.If parked for a long time, you should do a thorough maintenance before using it again, change the oil, filter, etc, and to check for fuel, electrical, and so on.Parking of your vehicle may be long cause problems with lubrication or circuit.

Choose good oil, can make the car more durable, more motivated. Good oil, especially fully synthetic motor oil in addition to can protect the engine, to lower the number of oil change, also can save fuel costs.So good tools is useful and necessary.
The Elm327 Bluetooth is the newly bluetooth obd2 interface the developed wireless.
It supports all OBD-II protocols

ELM327 Bluetooth Functions:
- Read diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning (over 3000 generic code definitions in the database).
- Clear trouble codes and turn off the MIL ("Check Engine" light)
- Display current sensor data
- Engine RPM
- Calculated Load Value
- Coolant Temperature
- Fuel System Status
- Vehicle Speed
- Short Term Fuel Trim
- Long Term Fuel Trim
- Intake Manifold Pressure
- Timing Advance
- Intake Air Temperature
- Air Flow Rate
- Absolute Throttle Position
- Oxygen sensor voltages/associated short term fuel trims
- Fuel System status
- Fuel Pressure oil.

ELM327 is the latest PC-based scan tool,it supports all OBD-II protocols and is dispatched with a number of compatible programs. The processor is an ELM327. The output protocol (connection to laptop) is USB cable.Elm327 usb driver is easy to use and very useful to diagnose cars.

The ELM327 software supports two platforms - DOS and Windows.ELM327 Software is also very easy to install,simply extract the files into a folder on your computer's hard drive, and you're ready to go. To uninstall the program, simply delete the entire contents of the folder where the program resides.
OBD-II Software for ELM327 is a free program that allows you to use your PC and a hardware interface to get the information from your car's computer.The program is very user-friendly, and easy to learn.

ELM327 USB Plastic OBD-II Scan Tool Functions:
1.Read diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning (over 3000 generic code definitions in the database).
2.Clear trouble codes and turn off the MIL ("Check Engine" light)
3.Display current sensor data, including:
Engine RPM;Calculated Load Value;Coolant Temperature;Fuel System Status;Vehicle Speed;Short Term Fuel Trim;Long Term Fuel Trim;Intake Manifold Pressure;Timing Advance;Intake Air Temperature;Air Flow Rate;Absolute Throttle Position;Oxygen sensor voltages/associated short term fuel trims;Fuel System status;Fuel Pressure;Many others..
4.Upcoming Function:
Data graphing and logging;Freeze Frame data;Continuous and Non-Continuous Oxygen Sensor test results