Exhaust air conditioning test vehicle

In situ idling and closing the air condition, the instantaneous fuel consumption manual air conditioning models show for 0.9L/h, the load is 20.8%. Open air conditioning, set the temperature minimum wind, instantaneous fuel consumption rose to 1.1L/h, the load also rose to 28.6%, obviously using air conditioning to the vehicle load increased a lot.

The minimum air volume, but the temperature up to 26 ℃, instantaneous fuel consumption display still is 1.1L/h, and the load value was decreased to 27.5% of the value, or 1%. It seems that for exhaust air conditioning, extreme changes in temperature on the load value even for fuel consumption without too big impact.

When we keep the temperature of 26 ℃, the volume to maximum block, instantaneous fuel consumption display is 1.1L/h, but the load is increased to 31%, the flow has a great impact on the load. Finally, we open the low-temperature + gale mode extreme, instantaneous fuel consumption remains stable in the 1.1L/h, the load is only increased to 32.2%, little overall change.

If this maintenance information can make your car healthy,so following OBD Tuning can make your car more better.

KWP2000 ECU PLUS Flasher Description:
Connects to USB
Supports high speed ECU flashing
Led Indications for USB-power/CAR-power/rx/tx
Can read and write a lot more ECU's than the normal KWP2000 Software

KWP2000 ECU PLUS Flasher Functions:
- Read and analys your current ECU software.
- Upgrad the ECU software with a re-mapped file.
- Repair ECUs with software problems or corruption.

KWP2000 ECU PLUS Flasher Workable Model:
For supported ECU's and the function on them pls. download the pdf file for more details !

Package Contains:
KWP2000 Plus device
USB A/B connection cable
OBD2 connection cable
38 pin Mercedes connection cable
20 pin BMW connection cable
female banana cable

How do you use the KWP2000 PLUS?
1.You need a computer. Installing KWP2000 Plus software.
2.Connect USB cable to your PC;
3.Connect to your car via standard 16-pin OBD2 connector;
4.Supports high speed ECU flashing
5.Led indications for USB-power Car-power/rx/tx
6.Support KWP2000+ software and other KWP/ ISO software

How to Read and Write data?
Read and Write
1.Click read button to read out the original data
2.Click write button and select the file you want to write
3.Save the file to you HD, edit or forward it -Follow the instructions on screen
4.switch off ignition and wait 10 seconds

KWP2000 ECU PLUS Flasher Packing List:
6 pc x Connect cables
1 pc x KWP2000+ Main unit
1 pc x Driver CD