Automatic Transmission Oil full user guide

Lubricating oil injected automatic transmission can not only play the role of lubrication and cooling, more important is to transfer power between the engine and gearbox. The working temperature of the lubricating oil is generally 120 degrees Celsius, so the high quality requirements of the oil, and must be kept clean.

We should always check the automatic transmission oil level is normal. Check method of automatic transmission oil and engine oil is not the same, need to preheat the oil to 50 ℃, then the gear lever is in gear after a short stay in the parking structure, then the normal oil dipstick corresponding surface should be located between the highest and lowest lines, such as not enough, the same quality in time to add oil.

In most cases, we remove the automatic gearbox oil bottom screws to miss the old oil and then add new oil change automatic transmission oil, but this only about new oil a small part, but also most of the old oil still left in the gearbox. If you are changing the way to remove oil pan, you can put 70% of the oil, so as to ensure the transmission of health. The oil present a better method is a dynamic change, using a dedicated transmission cleaning equipment, the full cycle of the old oil, drained and then add new oil, so oil change rate as high as 90%.

Choose good oil, can make the car more durable, more motivated. Good oil, especially fully synthetic motor oil in addition to can protect the engine, to lower the number of oil change, also can save fuel costs.So good tools is useful and necessary.However,airbag reset tool is important as oil.

X-200 is a kind of professional hand auto maintenance resetter, including CBS and OIL resetting, tire pressure alarm lamp resetting(by hand),timing belt CBS reset(by hand),OBDII engine diagnosis, brake pad changing of EPB Electronic Brake and other functions for resetting.

X-200 Oil Reset Tool Functions:
1 Oil Reset
2 Tire Pressure Warning Light Reset
3 Timing Belt Light Reset
4 OBD-II Engine Diagnosis
5 EPB Electronic Brake Pad Replacement
6 Throttle Reprogramming

X-200 Oil Reset Tool Features:
1.One click reset for V.W., AUDI. Input the service miles and days directly. No need to input any channel number. It supports all the vehicles till 2012.
2.Support EPB electronic brake pad replacement for V.W. Audi etc
3.Support engine oil, spark plugs, front brake pads, back brake pads, air conditioner, brake liquid,coolant liquid, vehicle checking, etc. reset for BWM. AND the supported BMW models are F01/F02/F03/ F04/F07/F10/F11/F12/F13/F18/F20/F30,etc.
4.Support the lifespan percentage setting of engine oil for Buick, Cadillac etc.
5.Support Mercedes Benz new C Class, E CIass models and Mercedes Benz VITO/VIANO/SPINTER.
6.Support Porsche Cayenne, Panamera till 2012.
7.Support most of Europe, American, Asia and Chinese brands vehicles.
8.Detailed and clear instructions make the operation more easier.
9.Support online updating. Please use large capacity TF card to guarantee the updating
successfully.
10.Morw functions are updating.

X-200 Oil Reset Tool Packing list:
1 pc* X-200 MAIN UNIT
1 pc*OBD II-16
1 pc*MAIN CABLE
1 pc*TF card
1 pc*TF card reader
1 pc*X-200 user's manual
1 pc*Compressed Case