Automotive Transmission jump file faults and exclusion

1.Finds a file in the jump file,will change the gear shift lever, and remove transmission cover watch gear meshing, such as good, should check the transmission fork shaft locking mechanism;to promote the transmission fork test location jump gear device by hand, such as poor positioning, remove the speed shifting fork shaft ball and spring inspection, such as the spring is too soft or broken should be replaced. If the transmission fork shaft groove wear too much shall repair or replace;

2.Check the gear meshing, such as gear is not fully engaged, with hand push jump gear gear or gear sets of proper meshing, should check the transmission fork is bent or too much wear, as well as the transmission fork fixed screw is loose, fork end and gear for groove clearance is too large. If the transmission fork bending correction; as a result of the transmission fork lower wear and sliding gear slot excessive looseness should be removed for repair;

3.As the transmission mechanism, and the gear or gear sets and proper meshing, it should check whether the wear tapered gear, such as severe wear should be replaced; check the bearing and shaft wear, such as shaft wear, bearing looseness or transmission shaft along the axial movement, should be removed for repair or replacement;Inspect the synchronizer work situation and, if failure should be repaired or replaced;

Say that buying a car easy, using a car difficult.In the car driven by the economic interests of the market environment, and finally the best price to buy a bed of roses, but also when buying car accessories, maintenance products with demonstrated effect is no exaggerated or even deceived.so how to choose good Auto Equipment is a challenge.

U581 Scanner is for real-time automotive diagnosis based on the OBD 2 & CAN-BUS protocol. It offers Full Feature Scanning including ‘LIVE DATA’. By simply plugging it into your vehicles diagnostic socket, you will be able to Read all Trouble Codes & Definitions related to the “Check Engine Light”, Save & Review results, Reset the trouble light, Monitor & Freeze-Frame Data,and more. Also retrieves the VIN (vehicle identification number) on supported vehicles.

1.LCD Display , 128*64 pixel display with contrast adjustment, Backlit
2.Enter key selects displayed
3.Exit key go back to the previous screens
4.Up/down arrows-moves the selection pointer and scrolls up or down.
5.LEFT/RIGHT arrows-Select responses and moves cursor.
6.OBDII connector cable, connect car and the scan tool

Functions of U581 Scanner:
- Works on all 1996 and newer cars & light trucks that are OBD II compliant (including the VPW, PWM, ISO, KWP2000 and CAN protocols).
- Reads and clears generic and manufacturer specific Diagnostic Trouble Codes (DTCs).
- DTCs definition displayed on the LCD screen, no need to cross-reference with code book.
- Reading Live Data
- Reading Freeze Frame Data.
- Testing I/M Reading Status.
- Reading Vehicle Info VIN (most vehicles built 2000 & up).
- Rescanning Data.

U581 Scanner Specification:
- LCD Display -128x64 pixel display with contrast adjustment, Backlit.
- "ENTER" key for selection of different functions.
- "ESC" key to go back to the previous screen.
- "UP"& "DOWN" arrows to move the selection pointer and scrolls up or down the menu.
- "LEFT"&"RIGHT" keys for selection of responses and move cursor.
- On/Off Power Button for performing software update process.
- OBDII connector cable for connecting scan tool to the vehicle's Data Link Connector "DLC".
- Battery compartment.

U581 Scanner Support system:
Misfire, Fuel System, Comprehensive components (ccm), EGR System, Oxygen sensor, Catalyst, Evaporative, O2 Sensor heater, Secondary air, Heated Catalyst, A/C System and many more.

U581 Scanner Package Including:
1pc x U581 Super CAN OBDII/EOBDII Memo Scanner
1pc x 1500mm length OBDII Connecting Cable
1pc x COM Cable for connecting U581 to PC
1pc x User Manual
1pc x Durable Nylon Storage Case