The driver had better shorten the oil’s change mileage

According to the franchise SUV vehicle dealer introduction, SUV usually take four wheel drive 4WD design, to meet the different road conditions. Most of the rear axle differential SUV equipped with anti-skid device, if a wheel slip, ensure that another round of still grip; and this situation is easy to generate high temperature, damage mechanism.

Therefore, consumers should be based on the original factory recommended the use of appropriate lubricating oil, with good lubrication, high temperature resistance and other characteristics, can we truly differential protection and automatic gearbox. So SUV owners had better shorten change mileage, replacement of high-quality total synthesis, high stability engine oil regularly, is the best method of engine maintenance.

To have a period of SUV, because the driving environment is complex and changeable, so it is best to do some thorough cleaning car. SUV car cleaning work, not just rely on a certain kind of detergent and protection products. As a result of the material to each part of the vehicle, and more scattered, dispersed, should pay attention to the choice of different detergent.

Choose the larger alkaline cleaners, although there whitening, decontamination effect, but there will be some troubles, too strong alkaline cleaning agents will soak flannel, leather chairs, ceiling, culminating in compaction, cracking. Professional approach is to select PH value should not exceed 10 cleaning fluid.

With the development of the city, more and more people own a car, the car also completed the transformation from the original luxury become family necessities. With the widespread use of the automobile, the problems attendant also continue to occur.So OBD Tuning is important.

Autel Maxiscan MS300 Description:
Reader supports all OBD2 protocols, including the newly released Controller Area Network (CAN) protocol. Though it is small, it is able to retrieve the same information as large expensive scanners!

Autel Maxiscan MS300 Feature:
Works with 1996 and newer cars & trucks that are OBD II compliant (including the CAN, VPW, PWM, ISO and KWP 2000 protocols)
Reads and clears generic and manufacturer specific Diagnostic Trouble Codes (DTC)
Turns off check engine light
Supports multiple trouble code requests: generic codes, pending codes and manufacturer specific codes
Reviews the emission readiness status of OBD monitors
Retrieves VIN (Vehicle Identification No.) on 2002 and newer vehicles that support Mode 9
Determines the malfunction indicator lamp (MIL) status
Free CD software with over 7000 DTC definitions
Easy to use with one plug-in
Highly reliable and accurate
Easy-to-read crystal-clear backlit 2-line LCD display
Stand-alone unit with no need for an additional laptop computer to operate
Small in size and conveniently fits in your palm
Safely communicates with the on-board computer
No batteries needed--powered via detachable OBD II cable

Autel Maxiscan MS300 Package Including:
-Autel Maxiscan MS300 Tool
-Instruction Manual

When you are driving on the uphill,should allow the engine to maintain sufficient momentum

When you driving on the uphill,should allow the engine to maintain sufficient momentum, choosing the right gear in advance, ready to prepare avoid driving under preparation. Should try to avoid parking on the mountain, when necessary, choose a relatively straight line of sight good security logs. Had to stop on the slope, be sure to tighten the hand-brake.

Absolute prohibition neutral slide downhill, because the vehicle center of gravity forward, the speed will be faster, the driver controls the speed if the frequent use of the brake pedal will feel leg weakness, fatigue, wheel brake drums and brake films will overheat, the light so that the brake performance degradation, severe failure of the brakes.

Therefore, when going downhill, the case should be based on the ramp and vehicle load mass the size of the desired speed of the gear suitable for hanging full use of the role of controlling the engine speed traction resistance, so to avoid excessive use of the foot brake.

As the car entered the family increased fastest, car maintenance way also became one of the most concerned topic at present. Besides going to repair shop for routine maintenance on a regular basis from time to time, for some small parts of the maintenance is also worth all of the fans, because their maintenance and care about your comfort and safety while driving.So diagnostic connector is useful.

Reader supports all OBD2 protocols, including the newly released Controller Area Network (CAN) protocol. Though it is small, it is able to retrieve the same information as large expensive scanners!

Autel Maxiscan MS300 Feature:
Works with 1996 and newer cars & trucks that are OBD II compliant (including the CAN, VPW, PWM, ISO and KWP 2000 protocols)
Reads and clears generic and manufacturer specific Diagnostic Trouble Codes (DTC)
Turns off check engine light
Supports multiple trouble code requests: generic codes, pending codes and manufacturer specific codes
Reviews the emission readiness status of OBD monitors
Retrieves VIN (Vehicle Identification No.) on 2002 and newer vehicles that support Mode 9
Determines the malfunction indicator lamp (MIL) status
Free CD software with over 7000 DTC definitions
Easy to use with one plug-in
Highly reliable and accurate
Easy-to-read crystal-clear backlit 2-line LCD display
Stand-alone unit with no need for an additional laptop computer to operate
Small in size and conveniently fits in your palm
Safely communicates with the on-board computer
No batteries needed--powered via detachable OBD II cable

The MaxiScan MS309 CAN OBD II/EOBD Code Reader provides DIYers easy and quick access to Diagnostic Trouble Codes and their definitions on all OBD II compliant vehicles sold worldwide since 1996. Though small in size, it is powerful enough to retrieve the same information as large expensive scanners.

MaxiScan MS309 Function:
-Works with all 1996 & later OBD2/CAN compliant US, European and Asian vehicles.
-Retrieves generic (P0, P2, P3, and U0) & manufacturer specific (P1, P3, and U1) codes
-Easily determines the cause of the "Check Engine Light".
-Turns off Check Engine Light (MIL), clears codes & resets monitors.
-Displays DTC definitions onscreen.
-Views freeze frame data.
-Displays monitor & I/M readiness status (emissions).
-Identifies pending codes.
-Bilingual interface & DTC definitions in English or Spanish.
-Retrieves vehicle information (VIN, CID & CVN).
-Supports CAN (Controller Area Network) & all other current OBD-II protocols.
-Large easy-to-read backlit LCD screen.
-DTC lookup software CD included.