Some attention matters on snowy day

If the wiper is frozen please don't jump to open the wiper, doing so will tear the wiper rubber surface make it lose efficacy, will not swing and damage the wiper motor. The correct approach is to start the vehicle open air and forward windscreen blower, heat to melt the ice freezing rain wiper.

In the snow after we drive can obviously feel when driving in snow vehicle control, leading to one of the reasons for this is that we use the tire tread, generally we use are all season tires, although in the snow can also provide a portion of the grip, but limited range. But in daily use tire wear is the biggest in the snow, so be sure to check before the tire tread, if it is found that the tire tread wear is too large it must be replaced.

In addition, as the tire rubber, the winter temperature is low, characteristics of rubber products is low temperature becomes hard, so this is also why winter conditions using the same tire vehicle braking distance will cause longer in winter. Here I suggest some of the conditions of the owner can be in the winter before the replacement of a winter tire to the vehicle, the special tires can be than the commonly used four tires in the winter had better grip, and can improve the driving safety in case of snow.

Cars make our life more and more convenient, but bring some trouble at the same time.However,we will solve it,if we use car diagnostic tool properly.

MaxiScan MS309 Description:
The MaxiScan MS309 CAN OBD II/EOBD Code Reader provides DIYers easy and quick access to Diagnostic Trouble Codes and their definitions on all OBD II compliant vehicles sold worldwide since 1996. Though small in size, it is powerful enough to retrieve the same information as large expensive scanners.

MaxiScan MS309 Features :
-Work with all 1996 and later OBD II compliant US,European and Asian vehicles
-Easily determine the cause of the Check Engine Light ( MIL)
-Retrieve generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) codes, and pending codes
-Turn off Check Engine Light (MIL), clear codes and reset monitors
-Display DTC definitions on unit screen
-View freeze frame data
-Display monitor and I/M readiness status (emissions)
-Multilingual menu and DTC definitions - English, Spanish,French and German, etc
-Retrieve vehicle information (VIN, CIN and CVN)
-Support CAN (Controller Area Network) and all other current,OBD II protocols
-Extremely easy to use and highly reliable

MaxiScan MS309 Function:
-Works with all 1996 & later OBD2/CAN compliant US, European and Asian vehicles.
-Retrieves generic (P0, P2, P3, and U0) & manufacturer specific (P1, P3, and U1) codes
-Easily determines the cause of the "Check Engine Light".
-Turns off Check Engine Light (MIL), clears codes & resets monitors.
-Displays DTC definitions onscreen.
-Views freeze frame data.
-Displays monitor & I/M readiness status (emissions).
-Identifies pending codes.
-Bilingual interface & DTC definitions in English or Spanish.
-Retrieves vehicle information (VIN, CID & CVN).
-Supports CAN (Controller Area Network) & all other current OBD-II protocols.
-Large easy-to-read backlit LCD screen.
-DTC lookup software CD included.

MaxiScan MS309 Packing include:
-MaxiScan MS309 Tool
-User's Manual

When you are driving on the uphill,should allow the engine to maintain sufficient momentum

When you driving on the uphill,should allow the engine to maintain sufficient momentum, choosing the right gear in advance, ready to prepare avoid driving under preparation. Should try to avoid parking on the mountain, when necessary, choose a relatively straight line of sight good security logs. Had to stop on the slope, be sure to tighten the hand-brake.

Absolute prohibition neutral slide downhill, because the vehicle center of gravity forward, the speed will be faster, the driver controls the speed if the frequent use of the brake pedal will feel leg weakness, fatigue, wheel brake drums and brake films will overheat, the light so that the brake performance degradation, severe failure of the brakes.

Therefore, when going downhill, the case should be based on the ramp and vehicle load mass the size of the desired speed of the gear suitable for hanging full use of the role of controlling the engine speed traction resistance, so to avoid excessive use of the foot brake.

As the car entered the family increased fastest, car maintenance way also became one of the most concerned topic at present. Besides going to repair shop for routine maintenance on a regular basis from time to time, for some small parts of the maintenance is also worth all of the fans, because their maintenance and care about your comfort and safety while driving.So diagnostic connector is useful.

Reader supports all OBD2 protocols, including the newly released Controller Area Network (CAN) protocol. Though it is small, it is able to retrieve the same information as large expensive scanners!

Autel Maxiscan MS300 Feature:
Works with 1996 and newer cars & trucks that are OBD II compliant (including the CAN, VPW, PWM, ISO and KWP 2000 protocols)
Reads and clears generic and manufacturer specific Diagnostic Trouble Codes (DTC)
Turns off check engine light
Supports multiple trouble code requests: generic codes, pending codes and manufacturer specific codes
Reviews the emission readiness status of OBD monitors
Retrieves VIN (Vehicle Identification No.) on 2002 and newer vehicles that support Mode 9
Determines the malfunction indicator lamp (MIL) status
Free CD software with over 7000 DTC definitions
Easy to use with one plug-in
Highly reliable and accurate
Easy-to-read crystal-clear backlit 2-line LCD display
Stand-alone unit with no need for an additional laptop computer to operate
Small in size and conveniently fits in your palm
Safely communicates with the on-board computer
No batteries needed--powered via detachable OBD II cable

The MaxiScan MS309 CAN OBD II/EOBD Code Reader provides DIYers easy and quick access to Diagnostic Trouble Codes and their definitions on all OBD II compliant vehicles sold worldwide since 1996. Though small in size, it is powerful enough to retrieve the same information as large expensive scanners.

MaxiScan MS309 Function:
-Works with all 1996 & later OBD2/CAN compliant US, European and Asian vehicles.
-Retrieves generic (P0, P2, P3, and U0) & manufacturer specific (P1, P3, and U1) codes
-Easily determines the cause of the "Check Engine Light".
-Turns off Check Engine Light (MIL), clears codes & resets monitors.
-Displays DTC definitions onscreen.
-Views freeze frame data.
-Displays monitor & I/M readiness status (emissions).
-Identifies pending codes.
-Bilingual interface & DTC definitions in English or Spanish.
-Retrieves vehicle information (VIN, CID & CVN).
-Supports CAN (Controller Area Network) & all other current OBD-II protocols.
-Large easy-to-read backlit LCD screen.
-DTC lookup software CD included.